PRACTICAL HOME MINING GUIDE
Home Miner Electricity Costs and Hardware Payback
Updated
Use this checklist alongside the detailed guidance below.
Quick answer
Calculate electricity from wall power, hours of use and your tariff. Then separate operating profit from hardware payback. The examples below are scenarios, not current tariffs or predicted mining returns.
Calculate your own running costs
Start with watts, hours and your tariff. Leave revenue blank to budget for electricity and other daily expenses. Add a revenue estimate before pool fees only when you want to explore profit and payback.
The electricity formula
1. Power
100 watts ÷ 1,000 = 0.1 kW
2. Energy
0.1 kW × 24 hours = 2.4 kWh/day
3. Bill
2.4 kWh × £0.25 = £0.60/day
Illustrative numbers: use the tariff shown on your own bill. A kW is a power rate; a kWh is an amount of energy.
Daily energy (kWh) = power in watts ÷ 1,000 × hours per day. Daily electricity cost equals that energy multiplied by the price per kWh.
At 24 hours of use, a 100 W device consumes 2.4 kWh a day. With an illustrative tariff of £0.25/kWh, that is £0.60 daily and £18 over 30 days. Use your own tariff; the currency symbol alone does not convert an amount.
Compare example power levels
| Example power | Energy per day at 24 hours | Daily cost at 0.25/kWh | 30-day cost |
|---|---|---|---|
| 20 W | 0.48 kWh | 0.12 | 3.60 |
| 100 W | 2.4 kWh | 0.60 | 18.00 |
| 300 W | 7.2 kWh | 1.80 | 54.00 |
| 500 W | 12 kWh | 3.00 | 90.00 |
Amounts use the same currency as the tariff. These are arithmetic examples, not specifications for named miners. Monthly figures here use 30 days; billing periods can differ.
Use power at the wall
See the MINI DOGE III PLUS specification assessment for a mode-by-mode example, and follow the home electrical setup guide when planning how equipment is powered.
Wall consumption includes the power supply’s losses. Board-only figures can understate the energy you purchase. Separate manufacturer ratings from your measurements, and check that watts correspond to the hashrate and operating mode under discussion.
For variable consumption, an energy meter’s measured kWh over a representative period can be more useful than a single watt reading. Include external fans and other equipment purchased to support the miner.
Handle different tariffs and operating hours
For time-of-use pricing, calculate each tariff period separately and add the results. If a device runs for eight hours at one price and sixteen at another, multiplying by the cheapest rate for all 24 hours is misleading.
An existing household standing charge is not automatically an extra cost caused by the miner. Distinguish incremental expenses from household charges you would pay anyway. Where mining leads to additional cooling consumption, include that separately.
Operating profit versus recovering the purchase
Revenue assumptions also depend on solo or pool mining and the payout rules. Include any extra cooling costs identified in your room and ventilation plan.
Mining receipts
Start with revenue before pool fees. Do not subtract a fee twice if a pool estimate is already net.
Running expenses
Subtract electricity, the pool fee and other daily costs. The remainder is operating profit or loss.
Purchase payback
Divide the total setup price by positive daily profit. A loss cannot repay the hardware.
Operating profit = revenue − electricity − pool fees − other running expenses. That does not yet recover the hardware purchase. A simple payback divides the total upfront cost by positive daily operating profit.
Example: revenue of 2.00/day, electricity of 1.20/day and a 2% fee on that revenue give 0.76/day before other costs. A 400.00 setup would take approximately 527 days to recover at unchanged inputs. This invented scenario is not a forecast for a real miner.
If operating profit is zero or negative, there is no payback under those assumptions. Price changes, difficulty, downtime, repairs and hardware depreciation can alter the result.
Stress-test the assumptions
Try lower revenue, a higher tariff and reduced uptime. Keep the initial purchase price and running costs visible alongside projected earnings. If an apparent opportunity only works under the most optimistic inputs, the estimate does not establish a robust purchase case.
Solo-mining statistical expected value must not be presented as a dependable daily payment. For solo hobby equipment, show the affordable running budget separately from block-finding probability.
Frequently asked questions
Should I use the manufacturer’s watt figure?
It is a starting estimate if no better evidence is available. Label it as stated power and check whether it includes the PSU and which mode it describes.
Is electricity-only profit my total return?
No. Hardware, fees, accessories, repairs, tax circumstances and resale value can matter. Our simple operating calculation is deliberately narrower.
Can I use GBP or USD?
Yes, provided every monetary input uses the same currency. Switching the label does not perform an exchange-rate conversion.
Sources and further reading
Research-based guide. No laboratory or noise measurements are claimed. Checked 4 October 2026.